Batch update test runs

  Work in Jama > Work in projects > Test management > Test runs >

Batch update test runs

Previous pageNext page Print this topic! Mail us feedback on this topic!

Sometimes, it is necessary to update more than one Test Run at a time. In addition, the following procedure can also mark a Test Run as Not Run, which will reset the duration of the Test Run to 0 and unmark any steps that had previously been marked as pass or fail.

To batch update Test Run status, select the Test Runs to be updated. This can be done by holding the shift button while selecting Test Runs in the grid:

TestRunMultiselect

 

Select the Batch Update Test Run Status from the Action menu:

TestRunBatchUpdate

Choose which items to update in the Batch Update window and select Next:

TestRunBatchUpdate2

 

Select the Test Run Status to be applied to these Test Runs:

TestRunBatchUpdateStatus

Select Next. Add any users or comments, if necessary and select Commit:

TestRunBatchUpdateCommit